Kawasaki Mule / Ridge / Teryx Hifonics Thor Sound Bar Mount by Axia Alloys

These fully adjustable mounts are for the Hifonics Thor sound bar and allow you to mount it on any size tube.Uses the Hifonics T-slot hardware that is supplied with the sound bar.Pivot a full 360′.

ADDITIONAL MOUNTING OPTIONS:If you find that your installation is more exotic or challenging that can be addressed with the included hardware we recommend our build partner AXIA ALLOYS. They offer a wide variety of billet aluminum mounts mounting system for more accessories that you can possibly install on your vehicle.

INSTALL STEPS - Roll Cage:

• STEP 1 - Choose the appropriate Top Tube Clamp [1] for your roll cage diameter. We have included 1.5, 1.75 and 1.875 inch clamps.
• STEP 2 - Insert 2 slide lugs [2] into the mounting channel on top of the sound bar. You want these lugs to be left and right in the channel.
• STEP 3 - Mount the Tube Clamp Base [3] to the Channel Slide Lug [2] using two [4/5] M5X10 screws. Make sure to prep both the left and right side of the sound bar. Position the hooked edge of the Clamp Base to the back of the sound bar-screw holes to the front.
• STEP 4 - With your assistant lifting the sound bar into position, you will confirm that the wires on the sound bar are not pinched and remain accessible on both ends.
• STEP 5-With the sound bar still held in the air by your helper, you will use the Top Tube Clamp to lock on the back of the Tube Clamp Base and use two [4/5] M5X10 screws per side (left/right) to mount the sound bar `the roll cage.
• STEP 5-Once your positioning is confirmed, use your hand tools to fully tighten the screws on the clamp. Your clamping system should not move left/right. If it is loose, you need to tighten the screws shown in STEP 2.
• STEP 6 - Wire up the sound bar

Sound Bar Mount Features:

• SOLD INDIVIDUALLY
• Fully adjustable mount for the Hifonics Thor sound bar and allow you to mount it on any size tube
• Uses the Hifonics T-slot hardware that is supplied with the sound bar
• Pivot a full 360 degrees

Color Options:

• Satin (raw aluminum) - A bright and shiny with a smooth aluminum machine finish with no coating. Typically only used if you plan to polish, paint or powder coat yourself.
• Bright Black Anodized - A bright and shiny deep black color with corrosion protection.
• Bright Clear Anodized (silver) - Still very bright and shiny but offers corrosion protection and some scratch resistance.