Enclosure for your Kawasaki Mule Pro FXT uses your existing hard roof and windshield.
This enclosure is made of heavy-duty ballistic material and installs easily.
Sides attach with wraps around your roll cage and across the top of your factory door with your choice of self-adhesive snaps (no drilling required), or pop rivet snaps (drilling required).
Each window unzips from the bottom allowing the door to fully open with unsnapping any snaps.
The windows also unzip from the top allowing windows to open for air or just reaching out of UTV for doing things like retrieving mail or opening gates, etc.
The entire side can be removed in seconds to allow for removal in warmer weather.
The back has a large window to provide an unobstructed view.
It attaches to the Kawasaki OEM roof with J-hook along the top and has wrapped on the side that wrap around the roll cage.
Custom made in the USA!
Please note that we have found a few roof models that are differing from the "Normal" roof model. Normally the lip of the rear of the roof where the rear window mounts just go straight up, we have been finding a few random lips that have a lip that goes up, then out about 1/4". If you have this type of roof there are 2 choices. 1.) let us know and instead of the J-Clip, we can add Velcro and you can attach the self-adhesive Velcro to the underside of your roof, or 2.) (most have chosen this way) clip off the "out" portion of the roof (1/4") so the J-Clip can attach.
- Width:40.00 (in)
- Height:8.00 (in)
- Depth:8.00 (in)
